Stanmore Hill

Discussion in 'Members Personal Layouts' started by Loch7009, Jul 25, 2016.

  1. Loch7009

    Loch7009 Full Member

    Messages:
    20
    Likes Received:
    6
    Joined:
    Jun 12, 2016
    :gday:
    I think a bit of an introduction is in order. I'm a youngish modeller who has a fascination with steam. This put me on track to modelling originally the LNER, but later the British Railways North-Eastern region. This at the moment is my grand project, a L-shaped layout point-to-point layout. One side, the 11 foot side has a 4 track fiddle yard at the back with am extension of the main yard on the front. The 12 foot side has the rest of the layout. It is actually based on a fictitious direct line from Middlesborouh to York. The station of Stanmore Hill is on the York end, where the line goes from double track to single track. Since this premise has been used it allows me to have a larger engine shed then normally Allocated to a station this size. It is DC however if I could if the funds it could be converted to DCC. I have gathered a rather large collection of engines, mostly ex-LNER but a few from each region as well. A trackplan is attached which shows the whole plan. Pictures will be posted at a later date. It is still yet to have most the scenery done to it but all the track and some buildings have been put down.Thanks, Loch EDIT: Actually I just realised that this is the final version of the trackplan that includes the second siding in the top left corner. This is still yet to be built.

    Attached files [​IMG]
     
    steve likes this.
  2. paul_l

    paul_l Staff Member Administrator

    Messages:
    9,848
    Likes Received:
    5,902
    Joined:
    Dec 5, 2015
    Hi Loch

    An impressive track plan and project, really looking forward to seeing pictures of real locomotives :avatar:

    Paul
     
  3. Toto

    Toto I'm best ignored Staff Member Founder Administrator

    Messages:
    15,419
    Likes Received:
    3,842
    Joined:
    Dec 5, 2017
    Hi Loch,

    Some size of a track plan. Looking forward to the pictures and thanks for your introduction.

    Loads of willing help here if you are looking for it.:thumbs:

    Cheers

    Toto
     
  4. ianvolvo46

    ianvolvo46 Staff Member Moderator

    Messages:
    5,331
    Likes Received:
    1,588
    Joined:
    Dec 8, 2015
    Phew that's some track plan you could pla ...? ... run trains for hours ... progress piccies please

    Ian :thumbup:
     
  5. Loch7009

    Loch7009 Full Member

    Messages:
    20
    Likes Received:
    6
    Joined:
    Jun 12, 2016
    :gday:
    Here's the pictures promised. And actually does anyone know how to add tension lock couplers to an airfix lowmac and an airfix 15 ton crane. Thanks, Loch
    EDIT: How does one post multiple pictures in the same post?

    Attached files [​IMG]
     
  6. Gary

    Gary Wants more time for modelling.... Staff Member Administrator

    Messages:
    7,316
    Likes Received:
    3,847
    Joined:
    Dec 5, 2015
    Great looking layout Loch, plenty of operational interest. :thumbs:

    As for your Lowmac, which of the three widths of the tension lock couplers are you using, or intending to use ??

    My option for fitting tension locks would be to cut out an area within the buffer mounting plate that bridges the buffers and glue in a piece of 20 thou or 30 thou styrene. Then you can either Araldyte (epoxy glue) or super glue a tension lock onto this styrene.

    See diagram.

    [​IMG]
    Cheers, Gary.
     
  7. SMR CHRIS

    SMR CHRIS Staff Member Moderator

    Messages:
    3,323
    Likes Received:
    545
    Joined:
    Dec 31, 2015
    Loch7009 wrote:
    Hi Loch great start to your layout thread, impressive station area, a lot of work already done.

    Loading photos see the link below however if you are using an IPad it may not work but from PC works fine.
    Link http://www.platform1mrc.com/view_topic.php?id=188&forum_id=42

    I have a iPad so When I post multiple photos, I put in a BCC link from a photo host like Flickr

    Will be waiting for more on this layout:thumbs:
     
  8. gormo

    gormo Staff Member Administrator

    Messages:
    5,991
    Likes Received:
    4,140
    Joined:
    Dec 5, 2015
    G`day Loch,
    Coupler height is your critical measurement.
    I would go with Gary`s suggestion provided you can accurately measure / establish the height and therefore the correct thickness of styrene to fit.
    I have added tension locks ( mini Bachmanns ) to wagons and used plastic spacers to approximate the height required. I drill into the spacer so that the tension lock can be screwed into place. The plastic spacer is either at correct height or too thin, which means the coupler will sit too high. The height can be adjusted with thin washers between the coupler and the plastic spacer if required, to bring it down to correct height.
    I hope that makes sense.????
    Nice layout by the way.....looking forward to see it develop.
    http://www.click:tophat:Gormo
     
  9. ed

    ed Full Member

    Messages:
    1,156
    Likes Received:
    118
    Joined:
    Feb 6, 2016
    Station looks busy Loch, nice picture :thumbup:

    Ed
     
  10. Toto

    Toto I'm best ignored Staff Member Founder Administrator

    Messages:
    15,419
    Likes Received:
    3,842
    Joined:
    Dec 5, 2017
    Nice picture. Loads going on there. Let me know how you are getting on with multiple picture uploading. If you are still having bother, we'll see if a clearer explanation can be given.

    I can't upload from my IPad but my PC is easy once you get the hang of it.

    Cheers

    Toto
     
  11. paul_l

    paul_l Staff Member Administrator

    Messages:
    9,848
    Likes Received:
    5,902
    Joined:
    Dec 5, 2015
    Hi Loch

    For coupling height, I use a piece of thin double sided tape to temporarily hold the coupling and packing materials in place, and adjust the amount of packing until the coupling is just above the coupling height (to allow for two thicknesses of tape). Then remove the tape and glue it all together.

    I use Kadee couplings now, so have a height gauge, for tension locks, pick a wagon, and mark which end you are going to use as the reference, and use this wagaon to set all other couplings to.

    Paul
     
  12. Loch7009

    Loch7009 Full Member

    Messages:
    20
    Likes Received:
    6
    Joined:
    Jun 12, 2016
    :gday:
    Ok These are the rest of the picture promised. Please excuse the horrible quality as these were taken on my phone while my camera is being fixed.1. A view of the engine shed.2. A view of the extension, all this area is going to be serving industry.3. 63601 on shed at the coal staithes 4. 65445 departing the industrial branch with a full train.5. A view of the signal box, a Hornby LMS one.6. A view of the headshunt, the station pilot is on break.7. A good view of the engine shed, a ratio crane is going to be installed here in the near future.8. A view of the station, goods shed and the tunnel portal towards York.9. A view of the train heading towards Middlesbrough.
    Thanks for the help guys. Loch[​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
    [​IMG]
     
  13. Loch7009

    Loch7009 Full Member

    Messages:
    20
    Likes Received:
    6
    Joined:
    Jun 12, 2016
    Gary wrote:
    :gday:
    I'm going to attempt to put the Bachmann UK couplers on it. The same with the 15t crane.Thanks, Loch
     
  14. Gary

    Gary Wants more time for modelling.... Staff Member Administrator

    Messages:
    7,316
    Likes Received:
    3,847
    Joined:
    Dec 5, 2015
    paul_l wrote:
    Unfortunately Paul, the Lowmac has sloped ends which would make it awkward to fit directly to the underside of the wagon. You would still need to cut into the buffer mount plate and fix a piece of styrene to make a level base for the coupler of choice.

    Cheers, Gary.[​IMG]
     
  15. Loch7009

    Loch7009 Full Member

    Messages:
    20
    Likes Received:
    6
    Joined:
    Jun 12, 2016
    :gday:
    Train Spotting At Stanmore Hill and the Pub![​IMG][​IMG][​IMG][​IMG]
     
  16. Toto

    Toto I'm best ignored Staff Member Founder Administrator

    Messages:
    15,419
    Likes Received:
    3,842
    Joined:
    Dec 5, 2017
    Some nice shots there. Coming along. Looking forward to seeing this progress.

    :thumbs:
     
  17. ianvolvo46

    ianvolvo46 Staff Member Moderator

    Messages:
    5,331
    Likes Received:
    1,588
    Joined:
    Dec 8, 2015
    Hi Loch that layout of yours appears to have the vital ingredient we all strive for ... enjoyment .. thanks for the pictures

    Ian :thumbup::thumbup:
     
  18. StevePower

    StevePower Full Member

    Messages:
    800
    Likes Received:
    49
    Joined:
    Dec 13, 2015
    Hi Loch, I built a few of those dapol / airfix lowmacs and I have to say they have ended up being static items on the layout. When I did manage to get tension locks installed I found that I couldn't get them to run very well at all around my layout. They just kept derailing, even with lead weight to stabilize them.
    What I did manage to do was get hold of some Hornby ones and they are really good.Here are a few pics of mine.Cheers Steve (Also in Sydney)

    [​IMG]
    [​IMG][​IMG]
    5 Lowmacs in a row. 4 of them are Dapol ones, and they don't move very much out of that siding.
    [​IMG]
     
  19. Toto

    Toto I'm best ignored Staff Member Founder Administrator

    Messages:
    15,419
    Likes Received:
    3,842
    Joined:
    Dec 5, 2017
    Nice shots of the loaded low macs. I have a couple of O gauge versions to build yet. Great wagons for posing. :thumbs:
     
  20. Loch7009

    Loch7009 Full Member

    Messages:
    20
    Likes Received:
    6
    Joined:
    Jun 12, 2016
    StevePower wrote:
    :gday:
    Quick question for you. Is it an easy conversion to convert the hornby lowmac from the large to small tension couplers? Thanks, Loch
     

Share This Page